UPI Study › Colleges › Dunlap-Stone University › Introduction to Computing
Dunlap-Stone University Transfer Credit · Computer Science 235

TECH-106 – Intro to Computing at DSU.

Earn this Dunlap-Stone University equivalency through UPI Study's Introduction to Computing — 3 ACE & NCCRS Approved credits, fully online, self-paced.

The Computer Science 235 syllabus is available to enrolled or registered students . Sign in to your UPI Study account to download it instantly — or enroll today to get access.

🎓3 College Credits ✓ACE & NCCRS Approved ⏱️Self-paced · 28–30 days avg.
Starts at $89/month · cancel anytime · or buy just this course for $250
Introduction to Computing — transfers as TECH-106 – Intro to Computing at Dunlap-Stone University
Signed Articulation Agreement · February 2025
UPI Study × Dunlap-Stone University
You complete at UPI Study
Introduction to Computing
Computer Science 235 · 3 ACE & NCCRS Approved credits
Transfers as
Dunlap-Stone University recognizes as
TECH-106 – Intro to Computing
3 transcript credits · DSU course: TECH-106
DEAC accredited since 2003 · Transcript sent directly to Dunlap-Stone University
📋 View full equivalency chart →
🎓 Credit
3 cr
Transferable to DSU
⏱️ Speed
28–30
Days average to complete
✅ Pass rate
97%
Student completion rate
What you'll learn

A full semester of introduction to computing, at your own pace.

🎯Learning outcomes
  • ✓Apply the functionalities of application software by performing practical tasks and critically assess the features and limitations of word processing, presentation tools, databases, and multimedia applications
  • ✓Identify and describe key components of systems software, such as operating systems and security protocols, before systematically evaluating and comparing different systems
  • ✓Design and optimize hardware systems by integrating and troubleshooting components, and critically evaluate their performance and interdependencies to propose innovations that enhance system efficiency; critically assess the historical evolution of computers and their economic impact, and synthesize a forward-looking analysis of future social, privacy, and economic implications of emerging technologies
  • ✓Create innovative solutions for network and data communication challenges using case studies; and critically evaluate evolving software development methodologies to propose improvements for next-generation network systems
📚Major topics covered
Application software & productivity suites Word processing, presentation & multimedia tools Systems software & operating systems Command line interface & file systems Computer hardware & system components Binary representation & data storage RAID arrays & data redundancy History of computing & social impacts Relational & distributed databases Database management systems (DBMS) Internet history & infrastructure Web design, scripting & internet security Network types, architecture & topologies Telecommunications & wireless systems Software development life cycle (SDLC) Programming methodology & pseudocode Boolean logic, algorithms & debugging
Grading: 25% Attendance · 25% Quizzes · 25% Assignments · 25% Final Exam
Simple process

Three steps to DSU credit.

1
📝

Enroll & start instantly

Pay $250 once (or use any UPI Study subscription) and start learning today. No application, no waiting list.

2
🎯

Learn at your pace · Pass the final

Watch lessons, take quizzes, and pass the proctored final — fully online, on your schedule. Most students finish in 28–30 days.

3
🏆

Transfer to DSU

UPI Study sends your official transcript directly to Dunlap-Stone University's registrar. DSU applies the equivalency: TECH-106 – Intro to Computing.

Pricing

Introduction to Computing — two ways to enroll.

Get this course + every other UPI Study course with a subscription, or buy just this one for a one-time fee.

UPI Study subscription

Best if you plan to stack 3+ courses toward your DSU degree. All UPI Study courses included — including Introduction to Computing.

Monthly
$89 /mo

Best if you finish in under 4 months

Choose Monthly
12 Months
$495 total

Save $573 vs paying monthly

Choose 12 Months
Lifetime
$599 once

Pay once — access forever

Choose Lifetime
Or just buy Introduction to Computing on its own
Only need this one course?

Just Introduction to Computing — one-time payment

Pay once, keep it forever. No subscription, no renewals. The simplest path if you only need this course to transfer to DSU.

  • ✓Lifetime access to Introduction to Computing
  • ✓3 ACE & NCCRS Approved credits, transferable to Dunlap-Stone University
  • ✓Self-paced — finish in 28–30 days or take longer
  • ✓Official transcript sent to Dunlap-Stone University
$250
one-time payment
Lifetime access · this course only
Enroll & start today →
Savings Calculator

Stack more courses, save more.

Tap any credit amount below to see how much you'd save at DSU.

Select credit amount
Tuition saved vs DSU per-credit rate
$1,170
Credits transferred
30
Months to complete via UPI
15

Savings estimate = credits × $475, DSU's undergraduate rate of $1,425 per 3-credit course (2026-2027 Academic Catalog). Under the articulation agreement DSU does not charge tuition for the UPI Study courses it recognizes as credit. Credit awards are subject to DSU's registrar review and policy.

Frequently asked questions

Everything about Introduction to Computing → DSU.

📚 About Introduction to Computing
What is Introduction to Computing?
Introduction to Computing is a college-level technology course covering core concepts and practical skills in the subject area. It is Computer Science 235 — worth 3 credit hours, carrying an NCCRS recommendation from NCCRS.
What technical background do I need?
No specific technical background is required to start. The course is structured to build from foundational concepts to practical application, making it accessible to students at any level.
Is this course self-paced?
Yes. The course is fully self-paced with no deadlines or fixed class times. Most students complete it in 28–30 days, but you can move faster or slower depending on your schedule.
How many college credits is this course worth?
This course carries an NCCRS recommendation for 3 semester credit hours. UPI Study courses follow the same evaluation standard used across thousands of colleges and universities.
Are there exams? How is grading done?
Yes — the course includes quizzes, assignments, and a final exam. Your grade is equally weighted: 25% Attendance · 25% Quizzes · 25% Assignments · 25% Final Exam.
How do I check if my university accepts UPI Study credits?
Check our Find My College directory . If your university recognizes NCCRS credit recommendations, UPI Study courses qualify. You can also book a free call with our team.
How does UPI Study compare to a traditional university course?
A traditional university course in this subject typically costs $500–$1,500+ per credit hour and requires fixed schedules, campus attendance, and semester timelines. UPI Study covers the same NCCRS-recommended content at $250 total , with no deadlines and no campus requirement.
Can international students take this course?
Yes. UPI Study courses carry an NCCRS recommendation — recognized by cooperating institutions in the U.S., Canada, the UK, and other countries. Students have submitted credits across 26+ countries.
🎯 About TECH-106 – Intro to Computing at DSU
Does Dunlap-Stone University accept Introduction to Computing as a direct equivalent to their TECH-106 – Intro to Computing?
Yes. UPI Study's agreement with Dunlap-Stone University lists UPI Study's Introduction to Computing as DSU's TECH-106 – Intro to Computing, a named course, not just elective or general-education credit. The credit posts to your DSU transcript once UPI Study sends the official transcript.
Will this transfer with full named-course credit, or just as elective?
Named-course credit. UPI Study's agreement with Dunlap-Stone University lists Introduction to Computing as TECH-106 – Intro to Computing, so it meets that course requirement on your DSU transcript, not a generic elective slot.
What if I've already taken TECH-106 – Intro to Computing at DSU or elsewhere?
If you've already received credit for TECH-106 – Intro to Computing, DSU typically applies UPI Study's Introduction to Computing as elective credit instead (at the registrar's discretion). Check with your DSU advisor before enrolling to confirm placement.
How does this compare to taking TECH-106 – Intro to Computing directly at DSU?
The credit value is the same: 3 credits toward your DSU degree. UPI Study's course is self-paced and online ($89/month or $250 one-time), so you can finish faster and start before you enroll at DSU. Many students complete UPI Study courses BEFORE enrolling at DSU to reduce overall program time.
Does Dunlap-Stone University ever change which courses they accept as TECH-106 – Intro to Computing?
Equivalencies are reviewed periodically. UPI Study's agreement with Dunlap-Stone University currently lists Introduction to Computing → TECH-106 – Intro to Computing. We update this page whenever that changes.
🔄 About transferring to DSU
How many UPI Study courses can I stack toward my DSU degree?
Dunlap-Stone University accepts up to 75% of degree credit requirements as transfer credit — up to 90 credits for the bachelor's degree. 68 UPI Study courses are recognized by DSU under the UPI Study × DSU articulation agreement, so you can stack a substantial portion of your degree before enrolling at DSU.
Do I need to enroll at DSU first?
No. You can take UPI Study courses with no DSU enrollment, no application, and no admission process. Take the course, earn the credit, then submit your transcript to DSU when you're ready.
How does the transcript reach DSU?
Once you complete Introduction to Computing, UPI Study sends an official transcript in PDF format directly to the email address designated by Dunlap-Stone University. DSU's registrar applies the agreed equivalency (TECH-106 – Intro to Computing) to your transcript. No third-party services are involved.
About this course

Understanding Introduction to Computing for your DSU credit.

What is Introduction to Computing?

Introduction to Computing is a survey course that explains how computers and software work at a practical level. It covers the main kinds of software people use every day, how operating systems and file systems organize work, how hardware parts fit together, and how data is stored and managed in databases. It also introduces the history of computing and the social effects of new technologies.

How the course teaches you

Introduction to Computing is a self-paced online course built around video lessons, with quizzes and an assignment along the way and a final exam at the end. Your grade is weighted evenly across 25% Attendance, 25% Quizzes, 25% Assignments, and 25% Final Exam. Once the course is complete and the transcript credit posts, Dunlap-Stone University recognizes it as TECH-106 – Intro to Computing.

How it helps beyond the classroom

The course covers word processing, presentation tools, databases, operating systems, and how hardware and networks fit together, which are the everyday tools most office and research roles expect you to handle. At DSU, the credit fits within the Associate of Arts: Business Administration, Bachelor of Business Administration, and Bachelor of Arts: Psychology programs as the general education or elective credit that Appendix 1 assigns to it. That gives you a practical technology foundation without adding an extra course to a degree plan that already has one.

Skills you walk away with

Use word processing, presentation, and multimedia tools for practical tasksCompare features and limits of common application softwareIdentify operating systems, security protocols, and other systems softwareNavigate command line interfaces and file systemsRecognize core hardware components and troubleshoot basic system issuesExplain binary representation, data storage, RAID arrays, and database management systemsAssess the social, economic, and privacy impacts of computing technologies

Taking this course toward DSU

After you finish the course, UPI Study sends your official transcript to Dunlap-Stone University. DSU's registrar then applies the credit as TECH-106 – Intro to Computing, a named course equivalency that maps to a specific course code in the DSU catalog, which is the strongest form of transfer recognition the university offers. Because the credit is tied to a catalog code, you can plan your remaining degree requirements around it as a DSU course. Transfer credit at DSU is limited to 90 credits, or 75%, so track your total transfer credits as you plan the rest of your degree.

Who this course is for

This course suits students who want a DSU degree and would prefer not to pay DSU's $475 per-credit rate for a three-credit introductory computing course, which would otherwise cost $1,425 at that rate. Working adults, people returning to finish a degree, and career changers who need basic technology literacy are well matched to it. It is not a fit for anyone who needs a programming or hands-on lab course, because this is a survey of how software, hardware, and data work at a practical level. Keep in mind that transfer credit is capped at 90 credits, so any credit earned through transfer counts against that limit.

Verified transfer details

What it means to transfer to DSU.

Dunlap-Stone University recognizes UPI Study courses for credit in its undergraduate degrees under the signed articulation agreement. Each course below has the DSU course, general education category or elective credit Appendix 1 assigns it.

What DSU offers UPI students
✓Signed articulation agreement (February 2025)
✓No DSU tuition for UPI Study credit it recognizes
✓100% online degrees for adult learners
✓DEAC accredited · Arizona licensed · AZ-SARA
The numbers
90 credits
Max transfer credits toward a bachelor's
75%
Max share of an undergraduate program from transfer

Transfer credits are never guaranteed. Students must be enrolled at DSU in good standing and meet course and program requirements. DSU is solely responsible for how it recognizes UPI Study courses.

Ready to start?

Start Introduction to Computing today.

Enroll for $250 (or use a UPI Study subscription), finish in 28–30 days, and transfer 3 credits to Dunlap-Stone University.