UPI Study › Courses › Globalization and International Management › Free lessons › Lesson 6.5 Free lesson
Constitutional Foundations of Trade. How treaties under Article Two shape international business
Globalization and International Management · Chapter 6: International Trade Fundamentals and Market ExpansionSection 6.5 · lesson 46 of 7311 min · free to watch
Lesson complete
Earn the 3 college credits for Globalization and International Management
Enrolling adds a quiz after each lesson, the graded work and the official transcript. Recommended for credit by NCCRS.
Next lesson: The Institutions and Agreements That Govern Global Trade →← Scaling Internationally: Methods, Strategies, and Entry Points for Breaking Into Foreign MarketsNext lesson: The Institutions and Agreements That Govern Global Trade →
In this lesson
How the Constitution decides who approves United States trade deals.
- Explain what Article II, Section 2 requires for a treaty
- Calculate the Senate votes a treaty needs from the senators present
- Compare treaties with congressional-executive agreements and Trade Promotion Authority
- Describe how the approval route affects stability and timing for a business
Free study notes
Get this lesson's notes by email
The key points and 4 practice questions with answers, in your inbox. One email, free.
One email. Unsubscribe in one click.
Transcript
Everything said in the video, section by section (1,501 words). Read along, or search it.
Opening Question
Who Has the Power to Say Yes
Imagine a school club, with a president and a council. The president can talk to other clubs, and agree on a joint event. But the council holds the budget.
If the president promises a big trade fair, without asking the council, other clubs will not know whether the promise counts. A country faces the same puzzle, when it signs a trade deal. Who really has the power to say yes?
In the United States, the answer is written in the Constitution. And it shapes how safe, and how fast, a trade deal is, for the firms that rely on it. This lesson walks through that answer, one clause at a time. We will read the words, count the votes, and then ask what it all means for a firm with goods to sell.
The Treaty Clause
President Makes Treaties With Senate Consent
Start with what Article II, Section 2, says. The Constitution divides power. Article II covers the President.
In Section 2, it says the President "shall have Power, by and with the Advice and Consent of the Senate, to make Treaties, provided two thirds of the Senators present concur."
Read it slowly. It is one long sentence, but it packs in a whole process. Three things happen. The President negotiates, and signs. The Senate must advise, and consent. And two thirds of the senators present must agree.
A treaty, here, is a formal written agreement between countries, that is governed by international law.
Once it is ratified by the President, after the Senate's consent, a treaty becomes part of the "supreme Law of the Land", under Article VI. So a treaty is not just a promise. Once it passes, it carries the weight of law at home, too.
Counting Votes
Two Thirds of Senators Present
Now count the votes. With all 100 senators present, two thirds of 100 is 66.67. A vote cannot be split. So 67 are needed. One vote fewer would fall just short. The rule always rounds up, to the next whole senator.
With only 90 present, two thirds is exactly 60. The rule is about senators present, not all senators. But a treaty still needs a large majority. That is a deliberate high bar.
Why so high? The framers wanted a commitment to other nations to have wide support, not just a narrow win. A deal that two thirds of the Senate backs is hard to call one side's project. It is meant to outlast any one election, and any one leader.
Here is a fun fact. The treaty clause was written at the 1787 convention in Philadelphia. That was the same meeting that created the Senate, and the presidency. And its two-thirds rule still stands today.
So there are two routes to a binding trade deal. Both start the same way. The President, and negotiators, agree on a text with the other country.
Two Routes
Treaty Versus Implementing Law
The first route is a treaty, under Article II, Section 2. It needs the Senate's advice and consent, with two thirds of the senators present. Then the President ratifies the treaty.
The second route is a congressional-executive agreement. It uses an implementing law, under Article I. A majority of the House, and of the Senate, must pass it. Then the President signs the bill into law.
The two routes differ in who must approve. And by how many votes. Notice that the House has no part in a treaty. It has a full part in the second route. In practice, the second route is the one used far more often, for trade. Let us see why.
The Usual Route
Congress Holds the Power Over Duties
Next: the route most trade deals take. Trade deals touch tariffs, taxes, and rules on goods. And the Constitution gives Congress, in Article I, the power to regulate commerce with foreign nations, and to lay and collect duties.
That power sits with Congress as a whole: the House as well as the Senate. A deal that changes duties reaches into that power directly. So it makes sense to bring both houses into the vote. A treaty, approved by the Senate alone, would leave the House out of a decision that is partly its own.
For that reason, the usual route for trade deals is the congressional-executive agreement, rather than a treaty.
Here is how it works. The President negotiates, and signs. Then Congress passes a law, to put the deal into effect. And a simple majority of both houses is enough.
With all members voting, that is 51 of 100 senators. And 218 of 435 representatives.
Trade Promotion Authority
Fast Track as a Bargain With Congress
Compare the two. A treaty needs 67 senators. The agreement route needs a majority in each house. So the bar is lower in the Senate. But a vote in the House is also required. A treaty needs a supermajority. The agreement route needs simple majorities.
Why a special procedure, on top of that? Congress can amend any bill. And the nations on the other side of the table do not want to negotiate a text, that may be reopened line by line.
This is where Trade Promotion Authority, or TPA, comes in. It was once called "fast track." In general terms, Congress sets goals for negotiators, and requires them to consult. In return, Congress promises a timely vote on the final implementing bill, without amendments.
Think of it as a bargain. Congress sets negotiating goals. It requires consultation, and notice. And it gets a say in the final text. The President negotiates with other nations, consults with Congress, and signs the final deal.
Common Mistake
Treaty and Trade Agreement Are Not Synonyms
In return comes the promise: a timely up-or-down vote, with no amendments. That promise is why other nations trust the deal. They know their negotiated agreement will get a clean vote. It will not be picked apart, line by line. Without that promise, a partner might give its best offer, only to see it changed after the deal was done. Few would negotiate seriously on those terms.
Here is a common mistake: assuming that "treaty" and "trade agreement" mean the same thing, in U.S. law. Many trade agreements are called treaties, in everyday talk. But they are approved by the congressional-executive route. The words matter. Because the vote, and the legal route, differ.
Business Impact
Stability and Timing Depend on the Route
Last: why the route matters to a business. Two things change for a business, depending on the route: stability, and timing.
First, stability. A deal set by a treaty has the weight of the Senate's supermajority behind it. An agreement carried by an ordinary law can be changed by later laws, with a simple majority.
How secure a deal is in practice also depends on politics, and on the rest of the legal system. Not on the route alone. So companies treat it as one input among several. A careful manager does not assume a deal is safe forever, or fragile forever. He watches the route, and the politics around it. A deal with wide support, from many sides, is less likely to be undone after the next vote. A deal that barely passed may face another fight.
Second, timing. A supermajority is harder to assemble. And a treaty can wait for the Senate's calendar. Agreements under TPA follow a more predictable path: negotiate, notify, consult, and vote.
Teaching Case
Rafael Plans Around the Vote Calendar
A manager who plans to sell or build abroad can use that path, to guess when new duty rates might apply. A plant, or a price list, built around new duty rates needs a rough date. The path gives one. A treaty waiting on the Senate's calendar gives far less to plan around.
Here is a teaching case: Rafael reads the calendar. Rafael and Lena are a composite case, and no real agreement is described.
Lena wants to open a plant in Ostria. And a trade agreement between the two countries is being negotiated. Rafael asks three questions. Is this a treaty, or a congressional-executive agreement? Is it under TPA? When might a vote come?
He cannot say what will happen. But he can say how it will be decided. So he plans around the calendar, instead of the rumor mill. If the deal is under TPA, he can sketch a rough window for the vote. And he can time the plant's first orders, so they do not land just before the duty rates change.
Try It Yourself
Votes Needed With 85 Senators Present
Try it yourself. Work out how many votes a treaty needs, when 85 senators are present. Remember to round up. Two thirds of the senators present is the rule, not two thirds of all senators. Then say, in one sentence, why a business might care whether a deal is a treaty, or a congressional-executive agreement.
Key Takeaways
Treaties, Agreements and Fast Track Recap
Key takeaways. Article II, Section 2, lets the President make treaties, with the Senate's advice and consent, and two thirds of the senators present. Article I gives Congress power over foreign commerce and duties. So trade deals usually pass as congressional-executive agreements, by simple majorities in both houses. Trade Promotion Authority trades negotiating goals and consultation for a timely vote, with no amendments. And for a business, the route shapes stability, and timing. Next, in lesson 6.6, the institutions and agreements that govern global trade. This lesson was made by UPI Study.
About Globalization and International Management at UPI Study
Globalization and International Management (Business 309) is a self-paced online course of 73 video lessons in 9 chapters, from the global business landscape and the international manager to virtual teams, global staffing, trade, protectionism, political and economic environments, foreign investment and exchange rates. It carries a NCCRS credit recommendation for 3 semester credits.
Every lesson transcript is free on pages like this one, and the videos are free with a free UPI Study account. Enrolling adds a practice quiz after each lesson, the graded work and final exam that earn the credit, and an official transcript on completion. UPI Study has helped over 130,000 students with college credits. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.
Enroll now → Course details Download the syllabus All Business courses Every course with PRO →
Compare: International Business vs Globalization and International Management
Why take it here
Why students take Globalization and International Management with UPI Study
Where the credit goes
Universities that work with NCCRS
Globalization and International Management carries a NCCRS credit recommendation. These universities work with NCCRS; some are UPI Study's signed partners. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.
Thomas Edison State UniversitySigned partner
University of the PeopleSigned partner
Charter Oak State CollegeSigned partner
Strayer UniversitySigned partner
Columbia Southern UniversitySigned partner
Indiana TechSigned partner
Penn StateWorks with NCCRS
Southern New Hampshire UniversityWorks with NCCRS
SUNYWorks with NCCRS
+many more cooperating universitiesFind my college →Find my college → Not listed? Ask Athena in the corner of this page, or book a 15-minute call.
FAQ
Questions students ask us
About Constitutional Foundations of Trade. How treaties under Article Two shape international business
What does Article II, Section 2 of the Constitution say about treaties?
How many Senate votes does a treaty need to pass?
What is the difference between a treaty and a congressional-executive agreement?
What is Trade Promotion Authority, or fast track?
About the Globalization and International Management course
How many college credits is Globalization and International Management?
How much does Globalization and International Management cost and what is included?
Which universities accept UPI Study credits?
How long does Globalization and International Management take?
How are the exams done?
How do my credits reach my college?
Ready for the full course? Earn 3 credits in Globalization and International Management.
73 video lessons, a quiz after each one, and the graded work that earns the credit. Recommended for credit by NCCRS.
UPIStudy PRO · $99 a month
Get college credit for Globalization and International Management for $99?
Take Globalization and International Management and every other PRO course for $99/month with UPIStudy PRO. Globalization and International Management carries an NCCRS credit recommendation; universities may consider it.
Or start PRO now · $99/month →The credit comes from finishing the full course and its proctored final exam. Your college decides what it accepts.
Updated
3 credits · NCCRSEnroll →