UPI Study › Courses › Globalization and International Management › Free lessons › Lesson 7.5 Free lesson
New Trade Theory Explains Who Trades What
Globalization and International Management · Chapter 7: Trade Policy, Protectionism, and Competitive AdvantageSection 7.5 · lesson 54 of 7311 min · free to watch
Lesson complete
Earn the 3 college credits for Globalization and International Management
Enrolling adds a quiz after each lesson, the graded work and the official transcript. Recommended for credit by NCCRS.
Next lesson: Shaping Trade Through Policy: Strategic Trade Policies and Their Outcomes →← Where Economics and Politics Collide: The Dual Forces Behind International TradeNext lesson: Shaping Trade Through Policy: Strategic Trade Policies and Their Outcomes →
In this lesson
How economies of scale and variety drive trade between similar countries.
- Explain intra-industry trade and why older theory struggles with it
- Calculate average cost per unit at different output levels
- Describe how first-mover advantage can let a few large firms dominate
- Evaluate the limits of new trade theory alongside older trade ideas
Free study notes
Get this lesson's notes by email
The key points and 4 practice questions with answers, in your inbox. One email, free.
One email. Unsubscribe in one click.
Transcript
Everything said in the video, section by section (1,582 words). Read along, or search it.
Opening Question
Why Trade Bread for Bread
Picture two neighboring towns, each with a big, busy bakery. One makes sourdough. The other makes rye. And each town also buys the other's bread. So why trade bread, for bread?
Older trade ideas say countries trade because they are different. One has oil, the other has farmland. One has cheap labor, the other has machines. Yet much of the world's trade is between countries that look quite alike. And they trade the same kinds of goods. New trade theory is the set of ideas that tries to explain that. It is also where a famous economist, Paul Krugman, made his name.
In this lesson, you will see why economies of scale can produce trade between similar countries. You will meet first-mover advantage, and see why a few large firms may dominate an industry. And you will compute cost per unit, at different output levels, and say what it means for trade policy.
Intra-Industry Trade
Look-Alike Countries Swap Similar Goods
Start with trade between look-alikes. Economists have a name for it. Trade in goods of the same industry, in both directions, is called intra-industry trade. A country both sells and buys cars. Or machines. Or bikes.
Older theory has trouble with this. It would expect each country to sell one kind of good, and buy another kind. A country trades wine for fabric. Grain for machines. It does not expect a country to ship bikes out, and ship bikes in, in the same year.
New trade theory was developed by Paul Krugman and others, from the late 1970s onward. It rests on a pair of forces, working side by side. Keep both in mind, because neither one is enough alone.
The first force is economies of scale. The cost of each unit falls, as a firm makes more. Usually that is because fixed costs are spread over more units. A fixed cost is one you pay, whether you make ten bikes, or ten thousand. Think of a factory, a design, or a tool set.
Taste for Variety
Scale Plus Variety Drives Two-Way Trade
The second force is simple. Buyers like variety. Some riders want a light city bike. Others want a sturdy cargo bike, to carry children or groceries. Few people want exactly the same thing.
Now put the pair together. A single factory cannot make every model at the best scale. So each country's firms focus on a few models, and sell them to the whole world. Meanwhile, its buyers import the models made elsewhere.
The result? Everyone gets more variety, at lower cost, than if each country made a little of everything. Each factory runs long and cheap on a few models. And each shopper still has a wide choice, because the other models arrive from abroad.
The work earned recognition. In 2008, Krugman received the Nobel Memorial Prize in Economic Sciences, for his analysis of trade patterns, and where economic activity locates.
Illustration
City E-Bikes Meet Cargo E-Bikes
Here is the lesson's picture of it. Two similar countries, Valdora and Ostria, both make electric bikes. Valdora makes city e-bikes, at large scale. Ostria makes cargo e-bikes, at large scale. Valdora buys cargo e-bikes from Ostria. And Ostria buys city e-bikes from Valdora. Same industry, both ways.
Scale makes each country focus on a few models. Neither country is better at bikes in general. Each simply got big in its own model, and its cost fell. That is the scale story, in one picture.
Worked Example
Average Cost Equals F Over Q Plus v
Next, doing the arithmetic. Numbers make the scale story concrete. These are illustrative numbers, from the lesson. Say a bike factory costs $2,000,000 a year, in fixed costs. That covers design, machines, and buildings. Each bike also needs $400, in parts and labor.
In words: average cost per bike is the fixed cost, divided by the number of bikes, plus the cost per bike. In symbols, AC = F / Q + v. F is fixed cost. Q is the number of bikes. And v is the variable cost per bike.
Now run it. At 5,000 bikes, the fixed cost per bike is $400. Add the $400 in parts and labor, and each bike costs $800.
At 10,000 bikes, the fixed cost per bike drops to $200. Add $400, and each bike costs $600.
What It Means
Selling Abroad Lowers Every Bike's Cost
At 20,000 bikes, the fixed share is just $100. So each bike costs $500. And at 50,000 bikes, the fixed share is only $40. Each bike costs $440.
Notice what changed, and what did not. The parts and labor stayed at $400, every time. Only the fixed share moved. Spreading the same fixed cost over more bikes lowers the cost of each one.
So what does it mean? A firm that sells to the world can reach 50,000 bikes, and a cost of $440. A firm that sells only in a small home market of 5,000 stays at $800.
Selling abroad is not just extra sales. It can change the cost of every bike. That is why scale and trade go together. The bigger the market, the cheaper each unit, and the stronger the firm becomes, at home and abroad.
First Movers
Getting Big First Means Getting Cheap First
Now, first movers and few firms. When scale matters this much, an industry can support only a few firms. Why? The company that gets big first, gets cheap first. A latecomer that starts small faces higher costs, and may never catch up.
A first-mover advantage can come from several places. Low cost, through scale. Learning by doing, because practice makes a team faster and better. A trusted name, that buyers already know. Or a network of suppliers, already in place.
It may not last forever. A rival with a better idea can still break in. But it can last a long time.
Let us test it, with the same illustrative costs. Take a market that wants 20,000 bikes a year. Suppose one early firm makes all 20,000. Its cost is $500 per bike.
Now suppose two equal firms share the market. Each makes 10,000, and pays $600 per bike. Then picture a late entrant, that manages only 5,000 bikes. It pays $800 per bike.
Consequences
History, Timing and Strategic Trade Policy
Compare the early firm with the small latecomer. The gap is $300 a bike. That is a huge cushion. The early firm can cut its price below $800, and still earn money. Meanwhile, the entrant would lose on every sale.
Same market, three ways of splitting it. And a very different cost per bike, for each. This is why the early firm wins.
Two consequences follow. First, which country hosts an industry may depend partly on history and timing. Not only on natural differences, such as climate or wages. A country that starts early may keep the industry, even if another country could have done as well.
Second, this opens a door for government. If the first firm to reach scale wins, then helping a home firm get there first might pay off. That idea is called strategic trade policy. Lesson 7.6 looks at it carefully, along with its risks.
Limits and Critics
An Addition to Older Theory
The theory has limits, and critics. It is hard to know in advance which industry has big scale effects. It is hard to know which firm will win. And it is hard to know whether a government's help would really tip the balance.
Supporters point out that the theory fits the large amount of two-way trade, between similar countries. Skeptics point to a risk: it gets used to justify protection that mostly serves insiders. Both views are held seriously.
So treat the theory as an addition to the older ideas, rather than a replacement for them. That is a common mistake to avoid. New trade theory does not say older theories are wrong. Differences between countries still explain a lot of trade. Scale and variety explain the rest, especially trade among similar countries.
Now a teaching case: Rafael and the cargo bike. The researcher studies a bike firm's reasons for exporting to Ostria. This is a composite case built for teaching. Brightloom is a firm of moderate size. And Ostria has its own bike makers. So why does Ostria buy from abroad?
Teaching Case
Rafael Finds Brightloom's Niche
He finds that Ostria's makers focus on cargo bikes, and sell them in many countries. Brightloom focuses on city bikes. Each makes fewer models, at larger volumes. So each model is cheaper.
Rafael also notes something about cargo bikes. The first firm to build a large cargo-bike plant holds a cost lead, that a new entrant would struggle to match. That is the first-mover advantage, at work.
So what does he decide? Brightloom should try to be the large-scale firm in its own niche. It should not try to make every kind of bike.
Here is a pro tip. When you see two similar countries swapping similar goods, ask two questions. Where is the fixed cost? And who got big first? Those two questions usually reveal the scale story.
Try it yourself. Pick a product that your country both exports and imports. Cars, machines, snacks. Why would buyers want both home-made and imported versions? And which side has scale on its side?
Key Takeaways
Scale, Variety and First Movers
Key takeaways. Much trade is between similar countries, in the same industry, in both directions. The answer: economies of scale, plus buyers' taste for variety. Average cost is fixed cost over output, plus variable cost, so it falls as output rises. The firm that gets big first gets cheap first, and may keep its lead. That opens the door to strategic trade policy, which has real limits. And the theory adds to older ideas, rather than replacing them. Next, in lesson 7.6, how governments try to tip such races. This lesson was made by UPI Study.
About Globalization and International Management at UPI Study
Globalization and International Management (Business 309) is a self-paced online course of 73 video lessons in 9 chapters, from the global business landscape and the international manager to virtual teams, global staffing, trade, protectionism, political and economic environments, foreign investment and exchange rates. It carries a NCCRS credit recommendation for 3 semester credits.
Every lesson transcript is free on pages like this one, and the videos are free with a free UPI Study account. Enrolling adds a practice quiz after each lesson, the graded work and final exam that earn the credit, and an official transcript on completion. UPI Study has helped over 130,000 students with college credits. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.
Enroll now → Course details Download the syllabus All Business courses Every course with PRO →
Compare: International Business vs Globalization and International Management
Why take it here
Why students take Globalization and International Management with UPI Study
Where the credit goes
Universities that work with NCCRS
Globalization and International Management carries a NCCRS credit recommendation. These universities work with NCCRS; some are UPI Study's signed partners. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.
Thomas Edison State UniversitySigned partner
University of the PeopleSigned partner
Charter Oak State CollegeSigned partner
Strayer UniversitySigned partner
Columbia Southern UniversitySigned partner
Indiana TechSigned partner
Penn StateWorks with NCCRS
Southern New Hampshire UniversityWorks with NCCRS
SUNYWorks with NCCRS
+many more cooperating universitiesFind my college →Find my college → Not listed? Ask Athena in the corner of this page, or book a 15-minute call.
FAQ
Questions students ask us
About New Trade Theory Explains Who Trades What
What is new trade theory?
What is intra-industry trade?
How do economies of scale lower average cost per unit?
What is first-mover advantage in international trade?
About the Globalization and International Management course
How many college credits is Globalization and International Management?
How much does Globalization and International Management cost and what is included?
Which universities accept UPI Study credits?
How long does Globalization and International Management take?
How are the exams done?
How do my credits reach my college?
Ready for the full course? Earn 3 credits in Globalization and International Management.
73 video lessons, a quiz after each one, and the graded work that earns the credit. Recommended for credit by NCCRS.
UPIStudy PRO · $99 a month
Get college credit for Globalization and International Management for $99?
Take Globalization and International Management and every other PRO course for $99/month with UPIStudy PRO. Globalization and International Management carries an NCCRS credit recommendation; universities may consider it.
Or start PRO now · $99/month →The credit comes from finishing the full course and its proctored final exam. Your college decides what it accepts.
Updated
3 credits · NCCRSEnroll →