UPI Study › Courses › Globalization and International Management › Free lessons › Lesson 7.8 Free lesson
Who Wins and Why: Unpacking the Principles of Absolute and Comparative Advantage
Globalization and International Management · Chapter 7: Trade Policy, Protectionism, and Competitive AdvantageSection 7.8 · lesson 57 of 7311 min · free to watch
Lesson complete
Earn the 3 college credits for Globalization and International Management
Enrolling adds a quiz after each lesson, the graded work and the official transcript. Recommended for credit by NCCRS.
Next lesson: The Three-Way Dynamic: How Business, Government, and Society Shape Each Other →← Doing It Better Than Anyone Else: The Principle of Absolute Advantage in TradeNext lesson: The Three-Way Dynamic: How Business, Government, and Society Shape Each Other →
In this lesson
Why even a country better at everything still gains from trade.
- Compute opportunity costs from a table and find each country's comparative advantage
- Show with numbers that trade benefits both countries when one is better at both goods
- Identify the range of swap rates that leaves both countries better off
- Contrast comparative advantage with absolute advantage and name the model's limits
Free study notes
Get this lesson's notes by email
The key points and 4 practice questions with answers, in your inbox. One email, free.
One email. Unsubscribe in one click.
Transcript
Everything said in the video, section by section (1,528 words). Read along, or search it.
Opening Question
Should the Best Chef Wash Dishes
Imagine the best chef in town is also the fastest at washing dishes. Should the chef wash dishes? Of course not. Every hour spent at the sink is an hour not spent cooking meals, that sell for far more. So the chef hires a helper, who is slower at washing. And the chef still comes out ahead.
That is the surprising idea of this lesson. And it solves a puzzle left open in lesson 7.7. What if one country is better at everything?
By the end, you will be able to compute opportunity costs from a table, and find each country's comparative advantage. You will show, with numbers, that trade can gain both countries, even when one is better at both goods. And you will contrast comparative advantage with absolute advantage, and name the limits of the model.
Ricardo's Twist
Opportunity Cost and Comparative Advantage
Start with Ricardo's twist. In lesson 7.7, each country was better than the other at one good. So trade was easy to see. Valdora was ahead in bikes. Ostria was ahead in helmets. Each specialized, and both gained.
David Ricardo asked the harder case. He did it in On the Principles of Political Economy and Taxation, published in 1817. His classic example used cloth and wine, made in England and Portugal.
Here is the hard case. Suppose one country, even with the same resources, can make both goods with less labor than the other. By Smith's test, it has an absolute advantage in everything. Does it still gain from trade?
Ricardo's answer is yes. And the key is opportunity cost: what you give up to get something. If making one more bike means making two fewer helmets, then the opportunity cost of that bike is two helmets.
Now the central term. A country has a comparative advantage in a good, if its opportunity cost of making it is lower than the other country's.
Key Insight
Every Country Has an Edge Somewhere
Here is the clever part. Both countries cannot be better at the same thing, in this sense. If one gives up less to make bikes, the other must give up less to make helmets. So each country always has a comparative advantage in something. Even a country that is worse at everything.
Think back to the chef. The chef is faster at both cooking and washing. But an hour of washing costs the chef a lot of cooking. For the helper, an hour of washing costs very little cooking. So the helper washes, and the chef cooks. The chef is not doing the helper a favor. The chef is simply putting every hour where it earns the most. Countries can do the same.
Worked Table
Computing Opportunity Costs per Good
Next, the opportunity-cost table. The numbers are illustrative, made up for teaching. Say Valdora has 100 hours of labor. Ostria has 240.
Now the hours needed per unit. In Valdora, a bike takes 10 hours, and a helmet takes 5. In Ostria, a bike takes 40 hours, and a helmet takes 8.
Look closely. Valdora is faster at both goods. So it has an absolute advantage in both. And Smith's test gives no reason for trade at all. This is exactly the puzzle.
So compute opportunity costs instead. In words: the opportunity cost of a bike equals the hours per bike, divided by the hours per helmet. Why? Because each bike uses up the time of that many helmets.
For Valdora, 10 divided by 5 is 2 helmets. For Ostria, 40 divided by 8 is 5 helmets.
For a helmet, invert it. Valdora: 5 divided by 10 is 0.5, or half a bike. Ostria: 8 divided by 40 is 0.2, or a fifth of a bike.
Reading the Result
Valdora Leads in Bikes, Ostria in Helmets
Now read the result. Valdora gives up fewer helmets to get a bike: 2, against 5. So Valdora has the comparative advantage in bikes. Ostria gives up fewer bikes to get a helmet: 0.2, against 0.5. So Ostria has the comparative advantage in helmets.
Valdora is ahead in both goods, by hours. But its edge is larger in bikes. A bike takes Valdora a quarter of Ostria's time. A helmet takes it more than half of Ostria's time. So bikes are where Valdora gives up least.
Gains From Specializing
Two More Bikes and Five More Helmets
Next, showing the gains. Start with an even split of hours. Valdora puts 50 hours into each good. That makes 5 bikes, and 10 helmets.
Ostria puts 120 hours into each good. That makes 3 bikes, and 15 helmets. So the world has 5 plus 3, which is 8 bikes. And 10 plus 15, which is 25 helmets.
Now each follows its comparative advantage. Valdora puts all 100 hours into bikes, and makes 10. Ostria puts all 240 hours into helmets, and makes 30.
The world now has 10 bikes, and 30 helmets. That is 2 more bikes, and 5 more helmets. Same hours of labor, more output of both goods.
What it means: Valdora could make helmets faster than Ostria. Even so, it is better for the world if Valdora uses its time on bikes, where its edge is bigger. The gain comes from moving each good to where its opportunity cost is lower.
Terms of Trade
Swap Rates Between the Two Costs
Now they trade. Which swap rates work? Any rate between the two opportunity costs. Valdora will give up a bike only for more than 2 helmets, its own cost. And Ostria will pay no more than 5 helmets per bike, its own cost.
So the price must lie between the two countries' own opportunity costs. Below that range, Valdora loses. Above it, Ostria loses. In between, both gain.
Suppose they pick 1 bike for 3 helmets, and swap 4 bikes for 12 helmets. Then Valdora holds 10 minus 4, which is 6 bikes. Plus 12 helmets. Before, it had 5 bikes, and 10 helmets.
Ostria holds 4 bikes, and 30 minus 12, which is 18 helmets. Before, it had 3 bikes and 15 helmets. Both are better off, in both goods.
Here is the proof that trade did something real. Valdora could not have made 6 bikes and 12 helmets alone. That would take 60 hours, plus 60 hours: 120 hours in all. And Valdora has only 100.
Teaching Case
Why Not Make Everything in Ashford
Now a teaching case: Rafael and the better plant. Rafael, Lena and Brightloom are a composite case built for teaching, and the numbers are illustrative. Brightloom's Ashford plant is faster than the Ostrian plant, at both bikes and helmets. So Lena asks a fair question: why not make everything in Ashford?
Rafael draws the opportunity-cost table. Each helmet made in Ashford costs half a bike. In Ostria, it costs only a fifth. So Ashford's hours are better spent on bikes.
But he adds a caution. The table leaves out shipping, tariffs, and the risk of relying on one supplier. So Brightloom still decides with judgment, not just arithmetic.
Watch out for a common mistake: mixing up the two ideas. Absolute advantage compares hours or output for the same good, across countries. Comparative advantage compares what each country gives up. A country can have the first in everything, but the second in only one good.
Comparing Ideas
Smith Versus Ricardo and the Model's Limits
Now, comparing the two ideas, and their limits. Absolute advantage came from Adam Smith, in 1776. Comparative advantage came from David Ricardo, in 1817.
Absolute advantage asks, who makes this good with fewer resources? Comparative advantage asks, who gives up less to make this good? One country can have absolute advantage in everything. But comparative advantage, never in everything. And when one country is better at both goods, only Ricardo's idea explains the gains, as long as opportunity costs differ.
The model rests on assumptions. Labor is the only input. Costs per unit stay constant. Goods move without transport costs. Workers move easily between industries. And technology is fixed.
Critics point out that real adjustments are not smooth. Workers in a shrinking industry may need years to retrain. The gains are not automatically shared fairly, inside a country. And scale effects and learning, from lesson 7.5, can change costs over time.
Pro Tip
Compare the Same Good's Opportunity Cost
Supporters answer that the central idea holds up well, even when the assumptions are relaxed. Gains come from differences in opportunity costs. Both views are held seriously by economists. So treat the model as a starting point for thinking, not a complete forecast.
A pro tip. To find comparative advantage, compute the opportunity cost of the same good in each country, and compare. The lower one wins. And if the two costs are equal, there are no gains from trade at all.
Try it with the chef. The chef washes dishes in 30 minutes, and cooks a meal in 15. The helper washes in 40, and cooks in 80. Compute each person's opportunity cost of one meal, in dishwashing loads. Who should cook?
Key Takeaways
Comparative Advantage in Brief
Key takeaways. Opportunity cost is what you give up. Comparative advantage goes to whoever gives up less. Even a country that is better at everything gains, by focusing where its edge is biggest. Specializing this way makes more of both goods from the same hours. Any swap rate between the two countries' own costs leaves both better off. And the model is a starting point, with real limits. Next, in lesson 8.1, how business, government and society shape each other in the global economy. This lesson was made by UPI Study.
About Globalization and International Management at UPI Study
Globalization and International Management (Business 309) is a self-paced online course of 73 video lessons in 9 chapters, from the global business landscape and the international manager to virtual teams, global staffing, trade, protectionism, political and economic environments, foreign investment and exchange rates. It carries a NCCRS credit recommendation for 3 semester credits.
Every lesson transcript is free on pages like this one, and the videos are free with a free UPI Study account. Enrolling adds a practice quiz after each lesson, the graded work and final exam that earn the credit, and an official transcript on completion. UPI Study has helped over 130,000 students with college credits. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.
Enroll now → Course details Download the syllabus All Business courses Every course with PRO →
Compare: International Business vs Globalization and International Management
Why take it here
Why students take Globalization and International Management with UPI Study
Where the credit goes
Universities that work with NCCRS
Globalization and International Management carries a NCCRS credit recommendation. These universities work with NCCRS; some are UPI Study's signed partners. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.
Thomas Edison State UniversitySigned partner
University of the PeopleSigned partner
Charter Oak State CollegeSigned partner
Strayer UniversitySigned partner
Columbia Southern UniversitySigned partner
Indiana TechSigned partner
Penn StateWorks with NCCRS
Southern New Hampshire UniversityWorks with NCCRS
SUNYWorks with NCCRS
+many more cooperating universitiesFind my college →Find my college → Not listed? Ask Athena in the corner of this page, or book a 15-minute call.
FAQ
Questions students ask us
About Who Wins and Why: Unpacking the Principles of Absolute and Comparative Advantage
What is comparative advantage?
How do you calculate opportunity cost to find comparative advantage?
What is the difference between absolute and comparative advantage?
What range of trade prices benefits both countries?
About the Globalization and International Management course
How many college credits is Globalization and International Management?
How much does Globalization and International Management cost and what is included?
Which universities accept UPI Study credits?
How long does Globalization and International Management take?
How are the exams done?
How do my credits reach my college?
Ready for the full course? Earn 3 credits in Globalization and International Management.
73 video lessons, a quiz after each one, and the graded work that earns the credit. Recommended for credit by NCCRS.
UPIStudy PRO · $99 a month
Get college credit for Globalization and International Management for $99?
Take Globalization and International Management and every other PRO course for $99/month with UPIStudy PRO. Globalization and International Management carries an NCCRS credit recommendation; universities may consider it.
Or start PRO now · $99/month →The credit comes from finishing the full course and its proctored final exam. Your college decides what it accepts.
Updated
3 credits · NCCRSEnroll →