UPI Study › Courses › Globalization and International Management › Free lessons › Lesson 6.7 Free lesson
When Trade Gets Complicated: Rules, Limits, and Restrictions in International Commerce
Globalization and International Management · Chapter 6: International Trade Fundamentals and Market ExpansionSection 6.7 · lesson 48 of 7311 min · free to watch
Lesson complete
Earn the 3 college credits for Globalization and International Management
Enrolling adds a quiz after each lesson, the graded work and the official transcript. Recommended for credit by NCCRS.
Next lesson: Strength in Numbers: How Regional Integration Agreements Reshape International Commerce →← The Institutions and Agreements That Govern Global TradeNext lesson: Strength in Numbers: How Regional Integration Agreements Reshape International Commerce →
In this lesson
Tariffs, quotas, sanctions, export controls and rules of origin compared.
- Calculate the cost of an ad valorem tariff and compare it with a quota
- Identify non-tariff barriers and explain who bears the cost of a tariff
- Distinguish embargoes, sanctions and export controls and why firms screen buyers
- Apply a regional value test to decide whether a product meets rules of origin
Free study notes
Get this lesson's notes by email
The key points and 4 practice questions with answers, in your inbox. One email, free.
One email. Unsubscribe in one click.
Transcript
Everything said in the video, section by section (1,506 words). Read along, or search it.
Opening Analogy
Concert Rules at the Border
You buy a ticket for a concert. But the show has rules. No cameras. No outside food. And only 500 tickets, for the whole town. Some people are turned away. Some pay more. And some find a way around. The rules change who gets in, and what it costs.
Governments run trade with the same kinds of rules, at the border. Some tax the goods coming in. Some limit how many. Some ban whole trades. And some check where a product really comes from.
This lesson sorts these tools. And it shows what each one does to a firm's costs, and plans. Some tools change a price. Some change a quantity. Some tools block a transaction. Brightloom, Rafael and Lena, our running example, are a composite case built for teaching. And Valdora is a fictional country.
Tariffs
Ad Valorem and Specific Duties on Bikes
Start with taxes, and caps, at the border. A tariff, or duty, as in lesson 6.2, is a tax on imported goods.
It comes in two forms. Ad valorem means a percentage of the value. Specific means a fixed amount per unit.
Suppose Valdora sets a tariff of 10% of each imported bike's value. Each bike is worth $1,000. The tariff is 0.10 times $1,000: $100. So the importer's cost rises to $1,100.
Now suppose 8,000 bikes arrive, in a year. The government collects 8,000 times $100. That is $800,000.
Buyers often pay part of it. And local bike makers can raise their own prices, a little. That is why tariffs please some groups, and annoy others. The government gains revenue. Local makers gain room to raise prices. And buyers, who pay more, are the ones who grumble.
A quota is a limit, on the quantity of a good that can be imported.
Quotas
Capping Quantity and Who Keeps the Margin
Suppose a country allows only 10,000 bikes, when buyers want 20,000. Bikes become scarcer. And the price tends to rise. Half the buyers who want a bike cannot get one, so those who can, pay more.
Put the two side by side. A tariff sets a price gap. A quota sets a quantity. With a tariff, $100 of each bike goes to the government. With a quota, the extra margin may go to the firms, or foreign sellers, that hold the permits to ship. Not to the government.
So who gains depends on how the quota licenses are given out. A permit to ship can be worth a lot of money, when goods are scarce. The holder buys at the world price, and sells at the higher local one. That gap is the margin.
There is a whole toolkit here. Six tools, in all. A tariff taxes imported goods. A quota: a cap on quantity. An embargo: a ban on trade with a country. Sanctions: penalties on named targets. Export controls: licenses for sensitive goods. And rules of origin: where goods count as made.
Non-Tariff Barriers
Standards, Licensing, Paperwork and Subsidies
Tariffs change prices at the border. Quotas limit quantities. They are the most visible, and the easiest to put a number on. The next three work through bans, penalties, and licenses. And the last decides which goods qualify, for special treatment.
Why use such limits at all? Supporters point to jobs. To new industries that need time to grow. Or to national security. Critics point to higher prices. To harm for firms that need imported parts. And to the risk that other countries retaliate.
Both sides are real. Lesson 7.2 sets them out in full. For a manager, the immediate task is simpler. Know the rate. And add it to the landed cost. A 10% tariff that nobody noticed can turn a profitable order into a loss.
Not all barriers are taxes or caps. Some go by another name: non-tariff barriers. They include product standards, for safety or labeling. They include import licensing. Slow, or unclear, paperwork. And subsidies that help local firms compete.
Common Mistake
The Importer Pays the Tariff
Some serve real safety goals. Others mainly shield local sellers. And telling the two apart is often the hardest part of a trade case, including the disputes in lesson 6.6. A safety rule that only foreign makers struggle to meet may be honest, or it may be a quiet wall. The text alone rarely says which.
Here is a common mistake: believing that a tariff is paid by the foreign exporter. Legally, the importer pays at the border. Who bears the cost in the end depends on prices, and competition. And often it is shared, among exporters, importers, and buyers.
Bans and Penalties
Embargoes, Sanctions and Export Controls
Next: trade prohibitions, penalties, and licenses. An embargo is a broad ban on trade with a particular country, in some, or all, goods.
Sanctions are penalties imposed for foreign-policy, or security, reasons. Broad sanctions can stop all trade. Or they can be aimed at named people, firms, or sectors. The measures include freezing assets, banning dealings, or restricting finance.
In the United States, lists of targets are kept by the Office of Foreign Assets Control, part of the Treasury Department. Dealing with a listed party, even by accident, can bring serious penalties. So firms screen their buyers, banks, and shippers, before closing a deal. Not knowing is rarely a defense. A quick check before the sale is far cheaper than a penalty after it.
Export controls are limits on selling certain goods, software, or know-how abroad. Usually, the reasons are security, or foreign policy. Some items need a government license, before they can leave.
In the United States, a main agency is the Bureau of Industry and Security, in the Commerce Department. It handles dual-use goods. Those are goods with both civilian, and military, uses.
Teaching Case
Rafael Screens a Big New Buyer
Take a motor controller, with sensitive technology. It may need a license, even if the buyer is friendly. The rule follows the item, and its possible use. Not the mood of the sale. A plain bike frame may leave freely. A part with sensitive technology inside may not, whoever the buyer is.
Here is a teaching case: Rafael screens a buyer. No real firm is described here.
A new distributor, from a third country, offers to buy 300 bikes at full price. And it asks to pay through an unusual bank.
Rafael does not just take the order. He checks whether the distributor, or the bank, appears on a sanctions list. He asks whether any part of the bike needs a license to leave. And he holds the shipment, until these are clear. A large order, at full price, with an odd payment route, is exactly the kind of deal that deserves a second look.
Lena is keen on the sale. She asks why a sale that big deserves a delay. Rafael says: "A fine could cost more than the profit."
Rules of Origin
Regional Value Share Decides the Duty
Last: rules of origin. Rules of origin decide which country a product "comes from," for trade purposes.
They matter, because many duty rates depend on origin. A trade agreement, as in lesson 6.8, may give a lower duty only to goods made largely inside the agreement's area.
Origin is not simply where the last box was packed. Common tests count the share of value made in the area. Or they check whether the product changed to a different tariff classification, during processing. The exact test is set in each agreement.
Take a bike, with $1,000 of value. Suppose $640 of it comes from parts and work inside the area. Then the regional share is 640 divided by 1,000: 64%. That clears an illustrative 60% line.
Now suppose Brightloom swaps to a battery from outside the area. And the regional share falls to $520. Then the share is 52%. And the bike loses its low duty.
Pro Tip
Prove Origin With Records
At the 8% rate from lesson 6.2, that costs 0.08 times $1,000. That is $80 more, per bike.
So origin rules can push a firm to change suppliers. That is a hidden effect of trade policy. A cheaper battery from outside the area can end up costing more, once the lost duty benefit is counted.
Here is a pro tip. Keep records of where each part comes from, and what it costs. A firm that cannot prove origin may lose a duty benefit. Even when its product really qualifies. Origin is something you prove, with papers. It is not something customs takes on trust.
Try it yourself. Pick a product you use daily. List three parts, or ingredients, and guess where each comes from. If a rule required 60% from one region, would the product qualify? What would you change? And would the change cost more than the duty it saves?
Key Takeaways
Six Trade Restriction Tools Recap
Key takeaways. A tariff is a tax on imports, and a quota caps quantity, with the extra margin going to permit holders. Other barriers, the non-tariff kind, include standards, licensing, slow paperwork and subsidies. An embargo bans trade with a country, sanctions penalize named targets, and export controls require licenses for sensitive goods. Rules of origin decide where a product counts as made, and they can change a firm's suppliers. And legally, the importer pays the tariff, though the cost is often shared. Next, in lesson 6.8, regional trade agreements. This lesson was made by UPI Study.
About Globalization and International Management at UPI Study
Globalization and International Management (Business 309) is a self-paced online course of 73 video lessons in 9 chapters, from the global business landscape and the international manager to virtual teams, global staffing, trade, protectionism, political and economic environments, foreign investment and exchange rates. It carries a NCCRS credit recommendation for 3 semester credits.
Every lesson transcript is free on pages like this one, and the videos are free with a free UPI Study account. Enrolling adds a practice quiz after each lesson, the graded work and final exam that earn the credit, and an official transcript on completion. UPI Study has helped over 130,000 students with college credits. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.
Enroll now → Course details Download the syllabus All Business courses Every course with PRO →
Compare: International Business vs Globalization and International Management
Why take it here
Why students take Globalization and International Management with UPI Study
Where the credit goes
Universities that work with NCCRS
Globalization and International Management carries a NCCRS credit recommendation. These universities work with NCCRS; some are UPI Study's signed partners. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.
Thomas Edison State UniversitySigned partner
University of the PeopleSigned partner
Charter Oak State CollegeSigned partner
Strayer UniversitySigned partner
Columbia Southern UniversitySigned partner
Indiana TechSigned partner
Penn StateWorks with NCCRS
Southern New Hampshire UniversityWorks with NCCRS
SUNYWorks with NCCRS
+many more cooperating universitiesFind my college →Find my college → Not listed? Ask Athena in the corner of this page, or book a 15-minute call.
FAQ
Questions students ask us
About When Trade Gets Complicated: Rules, Limits, and Restrictions in International Commerce
What is the difference between a tariff and a quota?
Who actually pays a tariff on imported goods?
How do embargoes, sanctions and export controls differ?
How do rules of origin work in a trade agreement?
About the Globalization and International Management course
How many college credits is Globalization and International Management?
How much does Globalization and International Management cost and what is included?
Which universities accept UPI Study credits?
How long does Globalization and International Management take?
How are the exams done?
How do my credits reach my college?
Ready for the full course? Earn 3 credits in Globalization and International Management.
73 video lessons, a quiz after each one, and the graded work that earns the credit. Recommended for credit by NCCRS.
UPIStudy PRO · $99 a month
Get college credit for Globalization and International Management for $99?
Take Globalization and International Management and every other PRO course for $99/month with UPIStudy PRO. Globalization and International Management carries an NCCRS credit recommendation; universities may consider it.
Or start PRO now · $99/month →The credit comes from finishing the full course and its proctored final exam. Your college decides what it accepts.
Updated
3 credits · NCCRSEnroll →