Running the International Enterprise: Practices, Pressures, and Priorities

UPI Study › Courses › Globalization and International Management › Free lessons › Lesson 2.2 Free lesson

Running the International Enterprise: Practices, Pressures, and Priorities

Globalization and International Management · Chapter 2: The International Manager: Mindset, Competence, and Cross-Cultural LeadershipSection 2.2 · lesson 15 of 7311 min · free to watch

← Managing Without Borders: What a Global Management Perspective Really MeansNext lesson: The Passport to Effectiveness: Traits of Successful International Managers →

Earn 3 college credits for Globalization and International ManagementRecommended for credit by NCCRS · Business 309 · self-paced · in UPIStudy PRO, $99 a month

In this lesson

Everyday practices and competing pressures in running a multinational business.

  • List four everyday practices of running an international enterprise: scanning, coordinating, adapting and learning
  • Explain the pressures for global integration and local responsiveness
  • Place decisions on a slider between doing things the same everywhere and fitting each place
  • Rank priorities in a decision and explain why the ranking can differ by case

Free study notes

Get this lesson's notes by email

The key points and 4 practice questions with answers, in your inbox. One email, free.

One email. Unsubscribe in one click.

Transcript

Everything said in the video, section by section (1,538 words). Read along, or search it.

Opening Analogy

One Pizza Recipe, Three City Kitchens

Think about running a pizza shop, with branches in three cities. The dough recipe should taste the same everywhere, or the name means nothing. But one city loves spicy toppings. Another has a different oven code. And the owner cannot be in all three kitchens.

Every day, she is pulled two ways at once. International managers live inside that tug of war. This lesson shows what they do each day, and which pressures push on their choices.

By the end, you will be able to list the everyday practices of running an international enterprise. You will be able to explain the two big pressures, toward one way, and toward local fit, plus the other pressures that push on managers. And you will be able to rank priorities in a decision, and explain why the ranking can differ by case.

Four Practices

Scanning, Coordinating, Adapting and Learning

Start with the work itself: what running an international enterprise involves.

An international enterprise is a business that operates in more than one country. Running an international firm requires work that a home-only firm never has to do. Four practices stand out: scanning, coordinating, adapting, and learning.

The first practice is scanning. Managers watch what is changing in each country: laws, prices, rivals, and customer tastes. These are the PESTLE forces, from lesson 1.3. A home-only firm watches one country. An international firm watches several, at once.

The second is coordinating. Managers line up work across places, so that a design finished in one country can be built in a second, and sold in a third. Each step depends on the one before it, even when they sit far apart.

The third is adapting. Managers decide what to change locally. That might be a battery size, a price, a label language, or a work schedule. Not everything changes; only what must fit.

The fourth is learning. Managers carry what worked in one place, to the others. That way, a good idea does not stay trapped in one office.

Practice Loop

One Complaint Moves Through Four Steps

Notice that all four need information to flow. A branch that never reports breaks the chain. So does a headquarters that never listens. That is why so much of international management, is really about communication.

Take Mei's design team, at Brightloom Bikes, a composite case built for teaching. A customer in the local market sends a complaint about a loose bell.

The sales office must scan it. Then pass it to design: that is coordinating. Then agree a fix that suits Marenna's roads: that is adapting. And then tell the other offices, so that no one repeats the mistake: that is learning. One small message moves through all four practices.

The four practices form a loop. What the firm learns in one country, changes what it scans for, and how it coordinates, next time. The loop never really ends; it just gets better informed.

Skipped Steps

Each Practice Protects the Others

Think about what happens if one step is skipped. Scan, but never coordinate, and the warning sits in one inbox. Coordinate, but never adapt, and the fix ignores local roads. Adapt, but never learn, and the next office makes the same mistake, months later. Each practice protects the others.

Two Big Pressures

Global Integration Versus Local Responsiveness

Now to the pull at the center of it all: the great tug of war.

Two pressures shape almost every international choice. The first pushes toward doing things the same way, everywhere. The firm saves money when it designs one product, uses one supplier, and trains people once. Call this pressure for global integration.

The second pushes toward doing things differently, in each place. Customers have their own tastes. Laws differ. And a local team knows its market best. Call this pressure for local responsiveness.

The international strategy literature describes this pair as the central tension of multinational management. You will see its structural answers, in lesson 4.2.

Neither pressure is wrong. A bike that suits steep Ostrian hills may need a stronger motor, than one for the flat roads near Ashford. So local responsiveness pays. But making motors in five different designs, costs a lot more than making one. So integration pays too.

The skill is to place each decision, at the right point between the extremes. Picture a slider. At one end: same everywhere. At the other end: fitted to each place.

Decision Slider

Placing Safety, Brand and Marketing

Managers place each decision on that slider. A safety standard usually sits far to the left, near "same everywhere". The brand promise sits near it. Motor power sits closer to the middle. Marketing words and work hours lean toward "fitted to each place".

These positions are illustrative. A firm may place the same item differently from another firm. The slider is a thinking tool, not a fixed answer.

Why does safety usually sit so far toward "same everywhere"? Customers in that market deserve the same protection as customers in Ashford. Saving money on safety in one place is not a local fit; it is a risk. Marketing words are different. A slogan that works in one language can fall flat in another, so fitting each place makes sense.

So, for each item, a manager can ask two plain questions. What do we save, by doing this the same way? And what do we lose, if it does not fit the place? The answers decide where the item sits.

Case Example

One Brake Frame, Local Pad Option

Here is the tug of war, inside Brightloom Bikes. Lena wanted every Brightloom bike worldwide to carry the same brake system, because buying in bulk saved money.

Daniel reported that local cyclists often slow their bikes on long, wet downhills. He wanted a different model for that plant. Neither was foolish. Lena spoke for integration. Daniel spoke for local responsiveness.

In the end, they settled on one common brake frame, with a local pad option. And they agreed to review the results, after a year.

That answer kept bulk savings from a shared design. It still met Ostrian riding needs. And the review meant they would check whether the choice worked, rather than assume it.

More Pressures

Currency Swings and Public Demands

Two pressures are not the whole story, though. Other forces join in, and managers need a way to rank them.

Two more pressures often join the tug of war. The first is money pressure. A currency that moves, can turn a profit into a loss, before a manager has done anything differently. Lesson 9.6 returns to this.

That pressure is strange, because nothing inside the firm has changed. The bikes are the same. The workers are the same. The prices on the shelf are the same. Yet the money that comes home is worth less, or more, than it was. A manager has to plan for that, even though she cannot control it.

The second is rules and public pressure. Laws, unions, local officials, and communities each want something. Lesson 8.1 maps how business, government, and society pull on one another.

When pressures collide, managers need priorities: an ordered list of what matters most, so that a choice does not depend on who shouts loudest.

Ranked Priorities

A Higher Rung Wins the Clash

Brightloom's priorities were written by Lena, for teaching purposes. First, obey the law, and keep riders safe. Second, keep the brand promise. Third, control cost. Fourth, fit local taste.

A higher rung wins, when two goals clash. Say a cheaper part saves money, but fails a safety check. Cost is third. Safety is first. So safety wins, and the debate is short.

Another firm might rank them differently. And the ranking itself can change with the case. A firm entering a market where taste decides everything, may lift local fit higher. The point is not one perfect ranking. The point is to have one, agreed, before the fight starts.

Without a ranking, the loudest voice in the room wins. Or the most senior one. Or whoever spoke last. With a ranking, the team can disagree about the facts, but still share a way to decide. That makes the choice fairer, and faster, and easier to explain to the offices that did not get their way.

Common Mistake

Global or Local, Chosen Item by Item

Try this. Think of a school with two campuses, that must share one rule book. Pick three rules. Which should be identical on both campuses, and which could differ? Write a one-line reason for each. Then check whether your reasons were about cost, fairness, or local conditions.

Now, a common mistake. People treat the two big pressures as a choice of one side. But firms rarely pick "global" or "local" for the whole business. They choose item by item, as the slider shows. And they revisit the choice as markets change.

And a pro tip. When two goals collide, write your priorities down, before you look at the case. A ranking made after you know which side you like, is just an excuse.

Key Takeaways

Practices, Pressures and Priorities Recap

Let's pull it together.

Running an international enterprise means four practices: scanning, coordinating, adapting, and learning. They form a loop, and they all depend on communication.

Two big pressures pull against each other: global integration, and local responsiveness. Managers place each decision on a slider between them, item by item. Money pressure, and rules and public pressure, join in. Ranked priorities settle the clashes, by an agreed order, not by volume.

Next, in lesson 2.3, you will look at the people themselves: which traits help international managers do this work well. This lesson was made by UPI Study.

About Globalization and International Management at UPI Study

Globalization and International Management (Business 309) is a self-paced online course of 73 video lessons in 9 chapters, from the global business landscape and the international manager to virtual teams, global staffing, trade, protectionism, political and economic environments, foreign investment and exchange rates. It carries a NCCRS credit recommendation for 3 semester credits.

Every lesson transcript is free on pages like this one, and the videos are free with a free UPI Study account. Enrolling adds a practice quiz after each lesson, the graded work and final exam that earn the credit, and an official transcript on completion. UPI Study has helped over 130,000 students with college credits. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.

Compare: International Business vs Globalization and International Management

Why take it here

Why students take Globalization and International Management with UPI Study

Manage across bordersGlobalization and International Management explains how companies work across countries: global strategy, cross-cultural leadership, virtual and multicultural teams, international staffing, trade and trade policy, political and economic risk, foreign investment and currencies. It is a common course in business administration, management and international business degrees.
Credit at a fraction of the priceThe same 3 credits can cost $750 or more at a US college. Here it comes with UPIStudy PRO at $99 a month, self-paced, with every other PRO course.
Finish your degree soonerTransfer credits reduce the courses you still owe, so you can graduate earlier or lighten a heavy semester.
Strengthen an applicationA completed college-level course on an official transcript shows admissions and scholarship committees you can do the work.
Study on your own scheduleNo start dates, no deadlines. Watch the lessons, practice, and take the final when you are ready.
130,000+students helped with college creditsACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.

Where the credit goes

Universities that work with NCCRS

Globalization and International Management carries a NCCRS credit recommendation. These universities work with NCCRS; some are UPI Study's signed partners. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.

Find my college → Not listed? Ask Athena in the corner of this page, or book a 15-minute call.

FAQ

Questions students ask us

About Running the International Enterprise: Practices, Pressures, and Priorities

What is the difference between global integration and local responsiveness?
Global integration is the pressure to do things the same way everywhere, saving money through one product design, one supplier and one training program. Local responsiveness is the pressure to adapt to each place because customer tastes, laws and local knowledge differ. International strategy writers describe this pair as the central tension of multinational management, and neither pressure is wrong.
How do multinational managers decide what to standardize and what to adapt?
They place each decision on a slider, item by item, asking what the firm saves by doing it the same way and what it loses if it does not fit the place. Safety standards and the brand promise usually sit near the same-everywhere end, product features such as motor power may sit in the middle, and marketing words and work hours lean toward local fit.
What are the main practices of managing an international business?
Four practices stand out: scanning, coordinating, adapting and learning. Scanning watches changing laws, prices, rivals and tastes in each country. Coordinating lines up work across places. Adapting decides what must change locally, such as a label language or schedule. Learning carries what worked in one place to the others. All four depend on information flowing between branches and headquarters.
Why should managers rank priorities before a decision?
Ranking priorities in advance lets an agreed order, rather than the loudest or most senior voice, settle clashes between goals. For example, if safety ranks above cost, a cheaper part that fails a safety check is rejected quickly. Rankings can differ by firm and case, but writing them down before looking at a specific case keeps them from becoming an excuse for a preferred answer.

About the Globalization and International Management course

How many college credits is Globalization and International Management?
Globalization and International Management (Business 309) carries a NCCRS credit recommendation for 3 semester credits. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities.
How much does Globalization and International Management cost and what is included?
Globalization and International Management comes with UPIStudy PRO: $99 a month for every PRO course, including all 73 video lessons of Globalization and International Management, a practice quiz after each, the graded work and final exam, and an official transcript when you finish.
Which universities accept UPI Study credits?
UPI Study has signed partner agreements with universities such as Thomas Edison State University, University of the People and Charter Oak State College, and works with universities such as Penn State, SNHU and SUNY. ACE and NCCRS have over 2,100 cooperating colleges that will consider accepting credits; the final decision is with the universities. Use "Find my college" on this page to check yours.
How long does Globalization and International Management take?
It is self-paced with no deadlines. The 73 lessons total about 14 hours of video; most students add reading and practice time and finish in a few weeks to a few months, on their own schedule.
How are the exams done?
Quizzes and assignments are online in the course. The final exam is taken online with proctoring; a person on the UPI Study team checks assignments, usually within two days.
How do my credits reach my college?
When the course shows 100% complete, request the official transcript from your dashboard. It is sent to the college you name, and you can send it to more than one. Check your college first with "Find my college" on this page, or ask Athena.

Ready for the full course? Earn 3 credits in Globalization and International Management.

73 video lessons, a quiz after each one, and the graded work that earns the credit. Recommended for credit by NCCRS.

Updated

Globalization and International Management
3 credits · NCCRS
Enroll →